LCD Screen Menu Operation Guide - Reverse Watch 2.0 Generic

The MAX-SAFE LCD Screen is used to display the MSB & RW 2.0 Main Screen, pre-warnings, activations, faults detected, warnings, and over-rides.

The display software has a menu screen that can be accessed by pressing and holding the MENU Button (see Figure 3, for button locations) for approximately 4 seconds. The screen will show a revolving menu with the below options. To rotate through the menu options, or input value display, use the UP and DOWN Buttons (see Figure 3 for button locations). To select the currently highlighted menu item, or select the currently displayed input value, or accept the input, press the ENTER Button. 

The Menus and Sub-Menus listed depend on how the MSB system is set up and configured. For instance, if Reverse Watch is not selected in Screen Operation Mode, then settings for Reverse Watch will not be visible.

The Setup submenu is passcode locked, and there are two levels with different passcodes:

1. Dealer
2. Manufacturing

The document covers all menus and set up functions for both levels and passcodes are available on request from SGESCO-MAX.