The MAX-SAFE Reverse Watch® 2.0 solution is an advanced reversing aid option that utilises an advanced radar to detect people & objects in blind spots, and brakes the vehicle if an object is detected in the pre-defined Danger Zone.
The MAX-SAFE Reverse Watch® 2.0 system gathers information from the vehicle’s BBM module CAN data and installed Radar Sensor. The system looks at the radar system and, if a signal from the radar is present, it will send a CAN command to the BBM Electronics to apply the park brake, and to neutralise the transmission.
This installation guide provides instructions on how to install the MAX-SAFE Reverse Watch 2.0® into Scania P Series vehicles with an Electronic Braking System and an Electronic Park Brake.
If this system is to be installed into a vehicle with a hooklift or trailer isolation, please refer to the relevant additional documents either Installation Guide – MAX-SAFE Reverse Watch® Body-not-Home Option or Installation Guide – MAX-SAFE Reverse Watch® Trailer Isolation.
For how to operate the Reverse Watch 2.0® system, please refer to the document Operational Functionality Guide – MAX-SAFE Reverse Watch® 2.0 System LCD Screen, and/or Operational Functionality Guide – MAX SAFE Reverse Watch® 2.0 – Body-not-Home.
Scania P Series EPB & EBS Installation Guide
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article