The MAX-SAFE Anti-Rollaway Brake System™ is designed to complement the existing park brake system of any vehicle. The brake system gathers information from electrical signals sent by system components and the vehicle electrical system. The MAX-SAFE ECU then determines the risk state of the vehicle having a roll-away scenario due to the operator leaving the vehicle without the park brake applied. The operator is provided with a pre-warning visually and audibly if the system determines that the vehicle is at the point of rolling away.
The MAX-SAFE Anti-Rollaway Brake System™ monitors a range of parameters so as to avoid a potential rollaway scenario. These are:
- Vehicle Speed
- Vehicle Park Brake Lever Position
- Driver Seat Pressure (ON SEAT / OFF SEAT)
- Driver Door Status (OPEN / CLOSED)
The system utilises a LED display or LCD screen to inform the operator of the system condition. If the system activates, a loud audible warning is sounded, and the spring brake is applied. The operator must then manually apply the vehicle park brake lever in order to reset the system and silence the audible warning.
The installation guides detail specific sets of steps necessary to install the MAX-SAFE Anti-Rollaway Brake System™ into DAF vehicles.
Dennis Eagle Elite 6 Euro 6 Vehicles
Dennis Eagle Elite 2 Euro 5 Vehicles
Dennis Eagle Elite 2 Euro 5 Vehicles with MSB v4
Dennis Eagle Diagnostic LCD Screen
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article